Echo Robotics Charging Station

Supports the Station Loop peripheral wire and two Field Zone peripheral wires.

Specifications

• Operating Temperature 32 to 122 °F (0 to 50° C)
• Input 120 VAC ‐ 60 Hz (360 W maximum)
• Charge Outputs 32 VDC (320 W maximum)
• Output Circuits Class 2

Required Tools

• 8 mm Deep‐well Socket / Driver Tape Measure
• 3 mm Flat‐Blade Screwdriver Hammer
• #1 Phillips Screwdriver Slip‐Joint Pliers
• Adjustable Wrench T‐27 Torx® Driver Wire Strippers (included with charging station)

AC Power Supply Wiring

• Use 14 AWG electrical wire and ½ in. diameter liq‐uid‐tight electrical conduit for AC power into the charging station.
• NOTE: Wire and conduit are not included with the charging station